Features
Frame Construction
Frame Is Made of steel fabricated construction of interlocked robust design, machines are constructed with safeguard against undesired deflections and breakage. The frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidity, alignment, accuracy and keeps frames structure at right angles to the bed.
RAM & BED
Ram and bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.
Accessories
Standard Accessories
- Foot Pedal and Die Block Lifting Link
- Motor Pulley
- Fly wheel & Gear guard 1 Stroke Counter
- Standard “V” Block Punch 1 Motor Mounting Bracket
Optional Accessories
- Motorized Back Gauge
- Automatic Lubrication System
- Vee-Belts
- Electric Motor & Starter / Control Panel Board 1 Various Type of Die & Punch
- Foundation Bolts
Specification
| Model | Ton | Bending Cap in Mild steel Length x Thickness |
Clearance Between Housings |
Stroke Per Minute |
Ram Adj. (MM) |
Depth of Throat (MM) T |
Main Motor HP |
|---|---|---|---|---|---|---|---|
| PB151 | 20 | 1525 x 1.6 | 1025 | 30 | 40 | 210 | 3 |
| PB 201 | 25 | 2030 x 1.6 | 1250 | 30 | 40 | 260 | 5 |
| PB251 | 30 | 2540 x 1.6 | 1550 | 30 | 40 | 260 | 7.5 |
| PB202 | 40 | 2030 x 2 | 1250 | 30 | 40 | 260 | 7.5 |
| PB252 | 40 | 2540 x 2 | 1550 | 30 | 40 | 260 | 7.5 |
| PB312 | 65 | 3150 x 2 | 1900 | 30 | 50 | 300 | 7.5 |
| PB153 | 40 | 1525 x 3 | 1025 | 30 | 60 | 300 | 10 |
| PB253 | 60 | 2540 x 3 | 1500 | 30 | 75 | 300 | 10 |
| PB313 | 80 | 3150 x 3 | 1850 | 30 | 75 | 300 | 12.5 |
| PB204 | 65 | 2030 x 4 | 1370 | 25 | 75 | 300 | 10 |
| PB254 | 80 | 2540 x 4 | 1535 | 25 | 75 | 300 | 12.5 |
| PB314 | 100 | 3125 x 4 | 1900 | 25 | 75 | 300 | 15 |
